Template

Move-out inspection checklist

A move-out inspection checklist records a unit's condition after the resident leaves, item by item, next to what the move-in record showed. This free checklist goes room by room so you can separate normal wear from damage, photograph what changed and open the work for the turn.

Bring the move-in checklist and photos. For each item, note the condition now (good, fair or damaged), whether it changed since move-in, and a photo. This is an operational checklist only.

Updated November 17, 2026

Before you walk

Unit address, unit number and resident name
Lease end date and the date keys were returned
Move-in checklist and move-in photos in hand
Forwarding address on file for the resident
Inspection date and time, and who walked the unit
Resident invited to attend, if your policy offers that
Camera or phone with dates shown on photos

Entry and hallways

Front door, locks and deadbolt
Walls, paint and ceiling: holes, marks or new colors
Floors and baseboards
Light fixtures and switches
Closets, doors and shelves

Living areas and bedrooms

Walls, paint and ceiling
Carpet or floors: stains, burns, pet damage, wear in traffic paths
Windows, screens, locks and sills
Blinds or window coverings, counted and working
Doors, hinges and door stops
Outlets, switches and cover plates
Closets, rods and shelves
Items left behind

Kitchen

Refrigerator and freezer: clean, working, shelves and drawers present
Stove, oven, burners and drip pans
Range hood, fan and filter
Dishwasher: runs and drains
Microwave
Sink, faucet, sprayer and drain
Garbage disposal
Cabinets, drawers, hinges and handles
Countertops: burns, cuts or chips
Floor, walls and ceiling

Bathrooms

Toilet: flushes, seat secure, no leaks at the base
Sink, faucet and drain
Tub or shower, tile, grout and caulk
Shower head, rod or door
Mirror and medicine cabinet
Vanity and cabinets
Exhaust fan
Towel bars, hooks and paper holder
Floor, walls and ceiling: signs of moisture or mold

Laundry, outside and storage

Washer and dryer, if provided, and the dryer vent
Water heater and furnace closet
Balcony, patio or deck
Storage unit, parking space or garage
Trash and personal property removed

Safety, systems and keys

Smoke and carbon monoxide detectors present and working
Heat and air conditioning run
Hot water reaches the tap
Keys, fobs, garage remotes and mailbox keys returned, with a count
Meter readings: electric, gas and water if metered

After the walk

For each change since move-in, mark normal wear or damage and attach the photo
List the repairs, cleaning and replacements needed, with a work order number for each
Note any charges according to the lease, with the item, the reason and the cost from the invoice or estimate
Send the deposit accounting within the time and in the form your local rules require
Start the make-ready checklist for the unit
File the checklist and photos with the resident's lease record

How to use it

  1. Walk the unit after the resident has moved out and returned the keys, in daylight if you can.
  2. Open the move-in checklist and go room by room in the same order, so each item has a before and after.
  3. Mark each item good, fair or damaged, and write what changed since move-in.
  4. Photograph every room, then close-ups of anything that changed, and note each photo next to its item.
  5. Separate normal wear, such as light scuffs or faded paint, from damage, such as holes, burns or broken fixtures.
  6. List the work needed and open work orders, then hand the list to whoever runs the make-ready.
  7. Keep the checklist and photos with the lease record. Deposit timelines and itemizing rules vary by state; this is not legal advice.
FAQ

Questions, answered.

Still have a question? Ask our team

What should a move-out inspection checklist include?

Every room and item that was on the move-in checklist, the condition now, whether it changed, photos, keys returned, meter readings and the list of work needed.

What is the difference between normal wear and damage?

Normal wear comes from ordinary living, like light scuffs, small nail holes or faded paint. Damage goes beyond that, like large holes, burns, pet damage or broken fixtures. Your lease and local rules decide how each is handled.

Should the resident attend the move-out inspection?

Many managers invite them, and some places require that they be offered the chance. Check your lease and local rules; this is not legal advice.

How soon should I inspect after move-out?

As soon as the keys are back, ideally the same or the next day. The sooner you inspect, the clearer it is what the last resident left and the sooner the turn can start.

Why compare with the move-in checklist?

The move-in record shows how the unit looked on day one. Comparing the two, item by item and photo by photo, shows what actually changed during the lease.

See Zrico run your portfolio.

Bring a property. We will show you, on your own data, what Zrico would have handled last month.