Calculator

RUBS utility allocation calculator

A ratio utility billing system (RUBS) splits a property's utility bill among units by a formula instead of a meter. Take the bill, remove the common area share, then multiply what is left by each unit's share: one unit out of the total, its occupants out of all occupants, or its square feet out of the total.

Enter the bill and the property totals, then one unit's occupants and square feet. Whether you can bill back utilities, and how, depends on your lease and on state and local rules; this is not legal advice.

Updated November 17, 2026

Calculator

This unit's charge–
Amount billed to residents–
Common area amount (not billed)–
This unit's share–

Estimates only. Check the numbers against your lease and your books.

How the calculation works

  1. Start with the utility bill for the period, such as one month of water and sewer.
  2. Take out the common area share: the part used by the office, laundry room, irrigation or other shared spaces. The owner keeps that part. What remains is the amount billed to residents.
  3. Find the unit's share. Equal by unit: 1 / total units. By occupants: the unit's occupants / total occupants. By square feet: the unit's square feet / total square feet. The blend averages the occupant and square-foot shares.
  4. Multiply the amount billed to residents by the unit's share. That is the unit's charge.
  5. Use the same totals for every unit in the same period, so the charges add up to the amount billed to residents.
  6. Count only units being billed in the totals. If vacant units are left out, the occupied units carry the whole amount, so decide how your policy treats vacancies.
Worked example

Bill $4,200.00 with a 10% common area share: $4,200.00 x 0.90 = $3,780.00 billed to residents. By occupants, a unit with 3 of 52 occupants pays $3,780.00 x 3 / 52 = $218.08. Equal by unit: $3,780.00 / 24 = $157.50. By square feet, 950 of 21,600: $166.25. The 50/50 blend: (5.77% + 4.40%) / 2 = 5.08% of $3,780.00 = $192.16.

FAQ

Questions, answered.

Still have a question? Ask our team

What is RUBS in property management?

RUBS stands for ratio utility billing system. It splits a master-metered utility bill among units by a formula, such as occupants or square feet, instead of reading a meter in each unit.

Which RUBS method is the fairest?

Occupants tracks water use most closely, and square feet tracks heating and cooling. Many properties blend the two. Pick one method, put it in the lease and use it for every unit.

How much should I take out for common areas?

Base it on what the common areas really use, such as a sub-meter on irrigation or laundry, or a reasonable estimate you can explain. The calculator takes any percent you enter.

Is RUBS allowed everywhere?

No. Some states and cities limit or regulate utility billing, require disclosures or set the methods. Rules vary by state; check local law and your lease. This is not legal advice.

Do the unit charges add up to the bill?

When every billed unit uses the same totals, the charges add up to the amount billed to residents, give or take a few cents of rounding. The common area amount stays with the owner.

See Zrico run your portfolio.

Bring a property. We will show you, on your own data, what Zrico would have handled last month.